1. WS2812B LED Strip is Powered By "5V Power Supply" (Not Included) And Is Controlled By ASingle Data Line From A Suitable Controller(Not Included).
2. 3-Pin JST Connector Included: Red:VCC, White:GND, Green:DATA.
3. The Strip Has Adhesive Tape On The Back(Except IP67). Installation Surface Must Be Smooth, Clean And Dry.
4. LED Strip Can Be Cut Between Every LED To Create Custom Lengths.
5. Do Not Bend Strip Sharply.
6. Longer Runs Should Be Powered From Both Ends To Reduce Voltage Drop.
7. 3-Pin JST Connector Wire is 20AWG.
